​Product Description

High temperature and wear ceramic ceramic pipes are mainly suitable for working conditions greater than 300 ℃. The ceramic uses high temperature resistant strong adhesive to paste the alumina ceramic sheet with a hole in the middle of the pipe, and then cooperate with the stud welding machine to fix the ceramic firmly On the inner wall of the steel.

Production Process
The welding ceramic tube process is a special process used to weld ceramic tubes together. This process requires the use of special materials and techniques to ensure that the ceramic tube is not damaged or its performance is affected during the welding process.

Before welding ceramic tubes, you need to prepare some tools and materials, including ceramic tubes, solders, clamps, heat sources, etc. Next, the surface of the ceramic tube needs to be cleaned to remove impurities and oil to ensure welding quality.

When welding, the solder needs to be melted into a liquid state and then filled into the joints of the ceramic tubes. After the solder has cooled and solidified, the clamps can be released and the soldering completed.
To ensure welding quality, you need to pay attention to the following points:
1. Select a solder that is compatible with the ceramic tube material to avoid chemical reactions or cracks during the welding process.
2. Adjust the temperature and power of the heat source to ensure uniformity of solder melting and stability of soldering temperature.
3. Control the welding time and pressure to ensure the filling and joint quality of the weld.
4. Quality inspection is required after welding to ensure that there are no defects such as pores and inclusions.

Technical parameters

Our Advantages

1. Super wear resistance: Vickers hardness is as high as 1800, used for powder transportation, and wear resistance is 20 times that of ordinary carbon steel

2. High-temperature resistance and no falling off: The ceramic sheet of the temperature and wear-resistant ceramic pipes is welded to the inner wall of the equipment through a stud welding process to form a strong anti-wear layer, which can ensure that the ceramic does not fall off under long term high-temperature operation

3. Convenient transportation and installation: relatively light in weight, easy to transport and install

​Company Profile

Yibeinuo New Material is a national high-tech manufacturing enterprise integrating R&D, design, manufacturing, and technical services in domestic wear-resistant ceramics. It has a certain influence on the domestic wear-resistant industry. One of the products is a wide range of temperature and wear-resistant ceramic pipes. It is used in steel, cement, coal, port, chemical, lithium battery, mineral processing, construction machinery, and other industries. It is exported to Southeast Asia, South Korea, Japan, Australia, Europe and the United States, and is well received by users at home and abroad!

​Production workshop introduction

Our company has a 70-meter high-temperature tunnel kiln and is equipped with advanced testing equipment. Products are widely used in steel, thermal power, mining, ports, construction machinery and other industries.

​Contact information

If you have any requirements, please feel free to contact us, and we will reply to you as soon as possible

Welcome to contact us

Best regards

AmyHuang

​

YIbeino New Materials focuses on the research and development of new wear-resistant ceramic materials and is committed to providing material conveying, pneumatic conveying system engineering design and equipment wear problems under various complex working conditions for cement, thermal power, steel, coal, port, chemical, new energy, mineral processing, engineering machinery, concrete pipe pile, and other industries. We have 20 years of industry experience in the field of wear-resistant materials, We provide one-stop service from production to installation, according to customer demand for product design, research and development, production, processing, and other services.

The company has a professional anti-wear construction team. Relying on our strong technical strength and years of accumulated practical experience, we can provide timely solutions to various wear problems and select appropriate wear-resistant materials and construction plans based on actual working conditions. Rational product design, on-site construction, and comprehensive after-sales service can help you effectively improve the operating efficiency and service life of your equipment and solve equipment wear problems under various complex working conditions.

We have more than 20 years of industry experience in the field of wear-resistant materials and a group of experienced technical and management personnel. We can provide product design, research and development, production, processing, and other services according to customer needs. The company has a full set of advanced equipment for the production of wear-resistant products. Our company's main products are wear-resistant ceramic sheets, wear-resistant ceramic liners, ceramic composite pipes, wear-resistant ceramic elbows (lithium battery pneumatic conveying elbows), wear-resistant ceramic roller lagging, the overall equipment is lined with ceramics, ceramic pump truck pipes, alumina structural ceramics, ZTA ceramics and other series of products. The products have high strength, high hardness, good wear resistance, and corrosion resistance.

Hunan YIbeino New Materials Co., Ltd. has passed the ISO9001:2015 quality system certification. The company has a strict quality control system. Product design, manufacturing, and installation services are fully integrated into the ISO quality management system. From raw material purchase and ingredients, All aspects from production process management to factory inspection and control ensure stable product performance and excellent quality.

The company has users all over the world, mainly exporting to the United States, Germany, Sweden, India, Turkey, the Netherlands, Italy, Spain, Japan, South Korea, Russia, Vietnam and other countries. The company adheres to the business philosophy of "integrity, hard work, innovation" and adheres to the "customer We provide our customers with high-quality services based on the principle of "quality first", welcome to patronize us!

Company Advantage

The company is a manufacturing enterprise, we have many years of on-site industry experience and can provide customers with the best equipment anti-wear design, product samples, quality service, and competitive prices.

Company Honor

The product patents are as follows: "A kind of elbow of pump pipe discharge anti-clogging pipe", "A lining board installation structure", "A lining board processing console", "A conveying device for ceramic-lined pipes" etc.

Sales Network

Our products are exported all over the world. Our company has always insisted on the business principle of "quality, innovation, and customers first".

Our Product

Wear-resistant Ceramic Wear Liner

ZTA Ceramic wear liner

Wear-resistant ceramic composite liner

The Impact resistant ceramic wear liner

Ceramic-composite liner

Ceramic rubber liner

Ceramic-composite wear-resistant elbow

Wear-resistant ceramic composite pipe

Concrete pump parts

Wear-resistant ceramic sheet

Ceramic and rubber pulley lagging​

Cyclone lined with wear-resistant ceramic

Ceramic components